 |
| Quantity: | |
|---|---|
330
sunoxy
Advantages:
Ø Sunoxy-330 has good compatibility with most of organic solvents, goodresistance to
extraction, odorless and excellent dielectric.
Ø It can be used together with other auxiliaries and assistant antioxidant such as phosphates, thioesters, light stabilizers and other functional stabilizer.
Ø Sunoxy-330 and Sunoxy-168 combine use will have excellent effect.
Ø Sunoxy-330 is especially suitable for requirements of anti-water extraction and color of PO
products. In the meantime,Sunoxy-330 can improve the resistance to water extraction of
PP tape yarn
Applications:
Ø Sunoxy-330 can be used in polyolefins , PP, PE, polybutylenepipe, model products,
cable , wire, and dielectric film.
Ø It also can be suitable for other polymers, such as linear polyurethane in engineering
plastic, polyamide, styrenehomo polymerization and copolymer.
Ø Sometimes, it can be used in PVC, PU, spandex, adhesive and other organic.
Recommended Dosage:
Polyolefin: 0.05 – 0.3% subject to the properties of relative polymers, processing condition and finished product heat-stability.
The best dosage is decided by products use requirements.
Hot-melt adhesive: 0.2-1.0%
Synthetic tackier resin 0.1-0.5%
Packing:
25kgs paper bag or 25kgs carton
Storage:
Should be kept in a dry and well-ventilated place.
Advantages:
Ø Sunoxy-330 has good compatibility with most of organic solvents, goodresistance to
extraction, odorless and excellent dielectric.
Ø It can be used together with other auxiliaries and assistant antioxidant such as phosphates, thioesters, light stabilizers and other functional stabilizer.
Ø Sunoxy-330 and Sunoxy-168 combine use will have excellent effect.
Ø Sunoxy-330 is especially suitable for requirements of anti-water extraction and color of PO
products. In the meantime,Sunoxy-330 can improve the resistance to water extraction of
PP tape yarn
Applications:
Ø Sunoxy-330 can be used in polyolefins , PP, PE, polybutylenepipe, model products,
cable , wire, and dielectric film.
Ø It also can be suitable for other polymers, such as linear polyurethane in engineering
plastic, polyamide, styrenehomo polymerization and copolymer.
Ø Sometimes, it can be used in PVC, PU, spandex, adhesive and other organic.
Recommended Dosage:
Polyolefin: 0.05 – 0.3% subject to the properties of relative polymers, processing condition and finished product heat-stability.
The best dosage is decided by products use requirements.
Hot-melt adhesive: 0.2-1.0%
Synthetic tackier resin 0.1-0.5%
Packing:
25kgs paper bag or 25kgs carton
Storage:
Should be kept in a dry and well-ventilated place.
